De PowerView Display:
– display gebaseerd op CAN, met volledig modulair ontwerp;
– makkelijk te bedienen;
– robuust en betrouwbaar design;
– configureerbare bedieningsknoppen;
– lcd-scherm, zichtbaar in direct zonlicht;
– verwisselbare omlijsting, knopjes, i/o interface en meer;
– meerdere talen;
– zeer duurzaam;
– verkrijgbaar in meerdere groottes.

De PowerView Display is verkrijgbaar in twee maten: de PVD 780 en de PVD 450.

De Powerview Display 780

Technische specificaties:

Display: Bonded print/glare-free glass and 7” (178mm) color transmissive TFT LCD
Resolution: WVGA, 800 x 480 pixels, 16-bit color
Viewing Angle: ±65o horizontal, +55o/-65o vertical
Orientation: Landscape or Portrait
Backlighting: LED, 1000 nit typical brightness 40,000 hr. minimum
Contrast Ratio: 400:1
Refresh Rate: 60 Hz
Microprocessor: Freescale™ i.MX357, 32 bit, 532 MHz, ARM11 core
Flash Memory: 2 GB total, 1 GB available for data logging
RAM: 128 Mbytes SRAM
Operating Voltage: 6-36 VDC, reverse polarity protected
Video Inputs: 3 NTSC/PAL (single channel viewable)
Connectors: 2 AMPSEAL 23 Pin (AMP 770680-1 and AMP 770680-4)
Keyboard: 10 tactile pushbuttons with white LED backlight
Touchscreen: (optional) projected capacitive
USB: (1) USB 2.0 host (OTG, full speed)
Real time clock: with Li-ion rechargeable battery backup

Communications:

  • (2) CAN 2.0B according to ISO-11898-2; J1939 and CANopen protocols; proprietary messaging
  • (1) RS-485 serial (MODBus master/slave or PVA gauge)
  • (1) USB Host (OTG)

Outputs:

  • (1) 500mA switched low-side
  • (1) Frequency Out (2Hz – 3 kHz, Vbat rms square wave) for tach

Inputs:

  • (3) Analog 0-5VDC, 4-20 mA, or resistive, 10-bit resolution
  • (5) Discrete Digital, Active High
  • (1) Frequency In (2Hz – 10 kHz), 5Vpk-pk min, 120Vpk-pk max

 

De PowerView Display 450

Technische specificaties:
Display: Bonded 4.3” color transmissive TFT LCD
Resolution: WQVGA, 480 x 272 pixels, 16-bit color
Aspect Ratio: 16:9
Orientation: Landscape or portrait
Backlighting: LED, 500-650 cd / m2 (30,000 hr lifetime)
Microprocessor: Freescale iMX35 32bit, 532Mhz
Flash Memory: 256 MB
RAM: 128 Mbytes DDR2 SDRAM
Operating Voltage: 6-32 VDC, protected against reverse polarity and load-dump
Power Consumption: 10W max
CAN: Two CAN 2.0B; optional NMEA 2000 isolation
RS485: 1 MODBUS Master/Slave
Video input (Optional): Two NTSC/PAL input channels with one displayed at a time.
Protocols: J1939, NMEA 2000, CANopen, freeform
Connection: 4 Deutsch DT 6-pin connectors
Keyboard: 8 tactile buttons (will support up to 16)
USB: 2.0 host (full speed), optional OTG support
Output: (1) Open-drain, capable of sinking 500 mA
Input: (1) Resistive, 0-5 V, or 4-20 mA (software configurable)
Real-time clock with battery backup

display